2008 TURBOMACHINERY INTERNATIONAL HANDBOOK
Edited by Kalyan Kalyanaraman
A directory and product guide for the rotating machinery industry. This book also includes specifications for turbines, compressors, and expanders; market analysis of turbomachinery and the U.S. power situation; and an update on wind turbine equipment. $50.00 each.

1. SAWYER'S GAS TURBINE ENGINEERING HANDBOOK
Edited by John W. Sawyer, P.E., and Dr. David Japikse
The third edition was written for engineers and managers in the gas turbine field concerned with research, design, manufacture, selection, application, evaluation, teaching, training, marketing and related activities. The Handbook is published in three volumes. The volumes may be purchased individually, or as a set.

Volume I Theory & Design - $89.50 each.
Volume II Selection & Application - $79.50 each.
Volume III Accessories & Support - $79.50 each.

2. SAWYER'S TURBOMACHINERY MAINTENANCE HANDBOOK
Edited by John W. Sawyer and Kurt Hallberg
This three volume handbook covers maintenance of all types of turbomachinery along with many aspects of installation, operation and troubleshooting, including balancing, alignment, and start-up. The Handbook presents techniques, procedures and case histories, along with common problems and solutions developed by both manufacturers and operators of turbomachinery. Each of the three volumes may be purchased individually, or as a set.

Volume I: Gas Turbines/Turbocompressors - $79.00 each.
Volume II: Steam Turbines/ Power Recovery Turbines - $79.00 each.
Volume III: Support Services and Equipment - $79.00 each.

3. INTRODUCTION TO TURBOMACHINERY
David Japikse and Nicholas C. Baines
This unique book presents comprehensive coverage of fundamental principles and industrial design, and covers turbomachinery application diversity. It focuses on basic physical understanding but acknowledges advances in modern computing methods and experimental techniques. $125.00 each.

4. CENTRIFUGAL COMPRESSOR DESIGN AND PERFORMANCE
David Japikse
This book provides a state-of-the-art review of the technology base of compressors and is a practical guide for designers. The author has been responsible for a number of significant technological advances, such as the two-zone model of impeller flow and the TEIS (two-elements-in-series) model of diffusion. Design examples from the author's vast experience are used extensively. $125.00 each.

5. COMPRESSOR SURGE AND STALL
Ronald C. Pampreen
A thorough survey and analysis of investigations into instabilities in axial and centrifugal compressors, this book provides a resource for engineers and scientists working in compressor design. It is suggested for compressor designers and users who appreciate the need for understandable surge lines for a wide range of stallfree, surge-free operation.$130.00 each.

6. DESIGN OF HIGHLY LOADED AXIAL FLOW FANS AND COMPRESSORS
Arthur J. Wennerstrom
In this monograph the author summarizes the most important points he has learned during a career devoted to advanced fan and compressor research and development. Although this work was originally aimed at military aircraft engine applications, much of it is relevant to commercial aircraft engines, and to industrial and even consumer-oriented turbomachinery. $95.00 each.

7. AXIAL AND RADIAL TURBINES
Hany Moustapha, Mark F. Zelesky, Nicholas C. Baines and David Japikse
This book starts with the fundamental principles of turbine design, but also includes the latest developments and understanding, including the essential role that computer-based analysis plays today. The coverage includes the aerodynamic and structural analysis of turbine blades, together with the important topics of life prediction, design for durability, blade cooling, and exhaust diffuser design. $145.00 each.

8. DIFFUSER DESIGN TECHNOLOGY
David Japikse and Nicholas C. Baines
This is the most comprehensive review of diffuser technology ever published. Over 1500 original research papers have been examined, and their results have been summarized and collated into a single reference volume with a critical commentary by the authors. This provides an overview which helps focus attention on the essential characteristics of diffusers and their applications, and a broad perspective by which new researchers and engineers can obtain an effective orientation to the basic characteristics of diffuser fluid dynamic problems. $160.00 each.

9. HYDRODYNAMICS OF PUMPS
Christopher E. Brennen, California Institute of Technology
This unique text focuses on special problems and design issues associated with pumps: the potential for cavitation, the damage and vibration problems which result from cavitation, and the possibility of large unsteady flows and forces on the machine. The book provides a coherent and unified treatment of the hydrodynamics of pumps with an emphasis on the underlying physical phenomena. An important reference text for engineers and scientists, it is also appropriate for graduate courses in turbomachinery. $95.00 each.

10. CENTRIFUGAL PUMP DESIGN AND PERFORMANCE
David Japikse, William D. Marscher and Raymond B. Furst
This is the most thorough, up-to-date, and comprehensive review of centrifugal pump design published in many years. The authors are practicing engineers with a wealth of experience in pump hydraulic and mechanical design, manufacture, installation, and troubleshooting. $145.00 each.

11. ADVANCED EXPERIMENTAL TECHNIQUES IN TURBOMACHINERY
Edited by David Japikse
The intent of this text is to make available the key material collected by recognized lecturers in the turbomachinery field for the general usage of industry. Since the authors of the various chapters are key experts in their field, this text should serve as appropriate starting points for thought by many readers. Each chapter in this book has been prepared in close collaboration with the original author. $49.50 each.

12. THE PROCUREMENT OF REPLACEMENT STEAM TURBINE BLADING
by William P. Sanders - $69.00
A guide to purchasing replacement steam turbine blades. The book guides the maintenance specialist through the procurement process, and also includes a section on reverse engrineering.

13. FUNDAMENTALS OF TURBOCHARGING
by Nicholas C. Baines- $95.00
This book is the first comprehensive treatment of turbochargers and turbocharging to be made widely available in the last twenty years. It is intended to serve as both an introduction to the turbocharger itself, and to the problems of matching a turbocharger with an internal combustion engine. The key to commercial success lies in achieving the correct compromise between performance, life, and cost, and this runs as a continuous thread through the book.

REPRINTS
Please contact Richard Zanetti by phone at 203-663-7814 or by e-mail at richardz@turbomachinerymag.com.