The two-frame platform for two-stroke marine engines is built around a cartridge design that lets operators exchange the rotating assembly during port calls.
|Articles|April 13, 2021
Case Study: VELO3D and Mohawk Innovation Technology
Author(s)Velo3D
Read how Mohawk Innovative Technology was able to realize their design in a Supercritical CO2 Application with VELO3D's metal additive manufacturing (AM) technology.
Related to this article
The Denver startup plans factory-built supercritical carbon dioxide systems designed to recover gas turbine exhaust heat.
GE Vernova will perform rotor life extension work on five 9F gas turbines in Egypt, adding 13 to 15 years of life to about 1,250 MW of capacity.
Hanwha Power secured ABS approval for a 22,000-m3 LNG-ammonia bunkering concept with hybrid-electric propulsion.
Ebara Elliott Energy expands its Houston center with in-house machining, welding, spin testing and multi-OEM turbomachinery services.
The Port of Victoria project would be only the second U.S. project to pursue NRC construction licensing for the GE Vernova Hitachi Nuclear Energy boiling water SMR design.
Ebara Elliott Energy enters liquid hydrogen aviation refueling, supplying a cryogenic pump for Chart Ferox’s GOLIAT trailer ahead of 2028 high-flow testing.
Condition monitoring and digital twins get called "AI" at nearly every industry panel, but neither one qualifies on its own. Klaus Brun and Rainer Kurz break down what actually counts as AI and where it fits into turbomachinery's diagnostic and design tools.
Trending on Turbomachinery Magazine
1
American Supercritical Raises $8 Million to Develop sCO2 Bottoming Cycles for Simple Cycle Gas Turbines
2
Ebara Elliott Expands Houston Turbomachinery Repair and Testing Center
3
GE Vernova Extending Life of Five 9F Gas Turbines in Egypt
4
ABS Backs Hanwha Power’s 22,000-m3 LNG-Ammonia Bunker Vessel
5