News

These Chinese electrolyzer manufacturers have secured orders for a total of 65 MW for projects in Oman, Thailand, and Uzbekistan.

The demonstration plant will produce 100 tons of “turquoise” hydrogen and 380 tons of synthetic graphite, a form of carbon, from natural gas on an annual basis.

The Millennium Enterprise Multiphysics Platform is a hardware/software digital twin solution that offers enhanced system design and analysis capabilities.

The United States DOE has reviewed and approved the safety design strategy for the Aurora fuel fabrication facility at the Idaho National Laboratory.

Rolls-Royce has increased the mtu Series 1600 engine performance up to 49% compared to the previous model, and it maintains high power density and lower carbon output in its class.

The agreement is designed to accelerate commercial-scale direct air capture solutions, and the companies will collaborate on three CO2 removal projects to advance this goal.

In April of this year, Kawasaki Heavy Industries will conduct demonstration tests for its Suiso Platform, which enables centralized hydrogen distribution management and trading.

The partners signed an MoU to conduct a feasibility study that will explore solutions to produce, store, and provide green hydrogen at ONEE’s Laâyoune power plant in Morocco.

According to John Marion, Senior Program Director at GTI Energy, sCO2 power cycles have the potential to supersede steam power.

POWERGEN International 2024, held Jan. 23 - 25 in New Orleans at the Ernest N. Morial Convention Center, opens its doors tomorrow.

The collaboration agreement will focus on implementing and launching combined-cycle power plant projects in Kazakhstan.

The acquisition adds pumps, cryogenic applications for the marine applications, as well as aftermarket services to ITT’s Industrial Process segment.

Caterpillar has demonstrated the validity of large-format hydrogen fuel cells by using them to supply backup power at Microsoft’s data centers.

The partners will design, build, and test a membrane-based carbon-capture technology using funds granted from the Department of Energy.

As GE Vernova advances toward becoming a stand-alone company, Jessica Uhl and Pablo Koziner have been appointed to serve as president of R&D and CCO, respectively.

The long-term collaboration agreement includes the technology transfer and licensing of Ceres’ solid oxide fuel cell and electrochemical solutions.

The Xe-100 small modular reactor was submitted to and completed the Canadian Nuclear Safety Commission’s pre-licensing vendor design review.

The acquisition of GETEC ENERGIE GmbH enables bp to deliver integrated energy solutions to customers in Germany and other European nations.

An affiliate of Platinum Equity has sold the 810 MW combined-cycle natural gas-fired power generation facility in Gettysburg, PA to LS Power.

The partnership will develop a series of novel catalysts to streamline the process of deriving methanol from synthetic gas intermediates.

RMS completed the upgrade and overhaul of a customer’s DH single-stage centrifugal compressor, replacing the water seals with a dry gas seal alternative.

The partners have signed a heads of agreement for natural gas liquefaction services from the first train at Glenfarne’s Texas LNG export terminal.

Advanced gas path upgrades were installed on four 9F.03 class gas turbines at the Sabiya power plant, adding power to the Kuwait grid without using additional fuel.

MAN Energy will provide 48 MAN 18V51/60DF dual-fuel engines, each with an output of 20.7 MW, for Karpowership’s fleet of power plant ships.

A combined-cycle plant in the Minhang Industrial Zone has entered commercial operation with Ansaldo Energia’s GT36 gas turbine technology.

Effective May 1, 2024, senior executive vice president Vagner Rego will replace Mats Rahmström as the president and CEO of Atlas Copco Group.

Tranter has been awarded a contract to supply six stainless steel heat exchangers for the removal of CO2 from the gas stream at a blue hydrogen plant in Texas.

The partners have signed an agreement to accelerate the front-end engineering design execution for a liquefied hydrogen supply chain.