Compressors

Bolt connections can be the weakest link of a turbomachine, so proper care, sizing, tension, and placement are key to avoiding leaks and other operational problems.

MAN Energy has been commissioned to deliver 11 RB-type compressor trains for a Brazilian floating production, storage, and offloading vessel (FPSO) at the Raia project.

The advantage of SSS Gears is that it specializes in one product—the SSS Clutch—and benefits from the knowledge it has built up over so many years.

The Appalachian Methane Initiative (AMI) found that non-oil and gas operations are the largest contributors of methane emissions in the pilot program, and in 2024 it will expand its monitoring area to more than 20,000 sq. mi. in the Appalachian Basin.

The March/April 2024 issue features insight into how the oil and gas industry is reducing methane emissions, a micro-reactor Q&A with Rolls-Royce, a discussion with GE Vernova on decarbonization, and more.

The GA 11-30 FLX uses up to 20% less energy, reducing start-up peak, unload power, and transient losses while delivering optimal flow at varying pressures.

This year’s show focused on the future—how to future-proof current assets and incorporate new ones.

Aftercooler discharge temperature was found to be a significant indicator of partial condensing potential and a critical variable to control and prevent condensation.

In this episode of the TurboTime podcast, Myth Busters Klaus Brun and Rainer Kurz talk about methane leakage.

Digital twins can improve maintenance and plant efficiency.

The January/February 2024 issue features an exploration of digital twins, hydrocarbon challenges for compressors, insights on Ansaldo steam turbines, and more.

The Navoi 3 power generation facility will produce 600 MW of electric power and 200 Gcal/h of heat with an M701 JAC gas turbine combined-cycle system.

Mechanical Solutions offers onsite testing and solutions for vibration challenges in turbomachinery.

In this episode of the TurboTime podcast, the Myth Busters break down the types of compressor drivers—their advantages and disadvantages, optimal applications, and more.

Turbomachinery International interviewed James Brooks, Director of Engineering at Valley Forge & Bolts, who showcased the company's new compression-based load-indicating fasteners.

Turbomachinery International interviewed Jay Palmer, Account Manager/Technical Sales at Valley Forge & Bolts, at POWERGEN 2024.

POWERGEN International 2024, held Jan. 23 - 25 in New Orleans at the Ernest N. Morial Convention Center, opens its doors tomorrow.

In this episode of the TurboTime podcast, James Montgomery and John Mason of Rolls-Royce talk about micro-reactors.

Reciprocating compressors present challenges—such as pulsation control, leakage, and mechanical reliability—in CO2 capture and storage applications.

RMS completed the upgrade and overhaul of a customer’s DH single-stage centrifugal compressor, replacing the water seals with a dry gas seal alternative.

Effective May 1, 2024, senior executive vice president Vagner Rego will replace Mats Rahmström as the president and CEO of Atlas Copco Group.

Considerations when selecting a lube oil include oxidative and thermal stability, viscosity, interactions with oil additives, and more.

RMS used its Pearland Works facility to conduct an overhaul operation for an AC VH-405 centrifugal compressor.

In part two of this two-part episode, Myth Busters Klaus Brun and Rainer Kurz cover the applications of digital twin technology, its advantages and limitations, and pairing it with AI.

Equinor Energy AS will receive three compressor bundles and two spare units for its Troll A platform off the coast of Norway.